Strip Identifiers From Ean128 Barcodes; Adding Codes To The Match List For Ean128 Barcodes - LXE MX3X Reference Manual

MX3X CE .NET 4.2
This checkbox is unavailable when Data includes no Code ID radio button is enabled.

Strip Identifiers from EAN128 Barcodes

When Strip Code ID is disabled (unchecked), the AIM Code or Symbol Code ID is included in the
barcode data being matched.
Scanned barcodes are not matched against the following parameters unless they are EAN128
barcodes. If the scan engine does not support EAN128 barcodes, or EAN128 barcodes have been
disabled, the Strip Identifiers from EAN128 Barcodes function is not available.
The user specifies whether the barcodes have an AIM Code ID (3 characters) or a Symbol Code
ID (1 character). They also specify whether the AIM or Symbol Code ID will be stripped or
passed through to the Codes match, as long as the barcode is an EAN128 barcode.

Adding Codes to the Match List for EAN128 Barcodes

The first elements of an EAN128 barcode are matched against the entries in the Match Code list,
in the order entered in the list. For example, if the match code list contains Item 0 ABC, Item 1 C
and Item 2 AB in that order, the AB has no effect. When a match is found (e.g. Code ID A was
matched by Item 0 ABC and the process terminated) or when the end of the list is reached,
processing terminates.
Up to 20 Codes (up to 16 characters each) can be added to the Match list. The characters can be
text or control characters, e.g. tab, carriage return. The characters can be entered into the Match
E-EQ-MX3XRG-L
Barcode – Advanced Processing – Strip Code ID
Barcode – Advanced Processing – EAN128 Barcodes
299
MX3X Reference Guide