Attach To Hip-Flip (Optional); Figure 11 Hip-Flip Accessory - LXE MX3X User Manual

Optional Devices

Attach to Hip-Flip (Optional)

Note:
Note:
Once the MX3X is attached to the hip-flip and the hip-flip securely fastened to the user by a belt
around their waist, the MX3X can be operated at a convenient height, leaving the user's hands
free.
The hip-flip adjusts downward to allow removing and replacing the main battery without
removing the unit from the hip-flip or the user's body.
The MX3X must be removed from the hip-flip before being placed in a docking station.
Caution:
Installation
1. If the MX3X has a handstrap, remove the handstrap and set it aside along with the handstrap
screws and washers.
2. Slide the MX3X into the pocket in the hip-flip, making sure the keypad is up and the endcap
ports are visible in the openings at the base of the hip-flip.
3. Place the MX3X (in the hip-flip) on a flat stable surface with the keypad down.
4. Tighten the assembly with the black screws provided, using the holes used for the handstrap
(if used) on the back of the MX3X.
5. Test the hip-flip's connection making sure the MX3X is securely attached.
6. Slide the waist-belt through the loop in the hip-flip and secure the belt around your body.
E-EQ-MX3XOGWW-L
The MX3P does not fit in the Hip-Flip accessory. The Hip-Flip is not to be used with the
MX3P device. See Accessories for device-specific holding accessories e.g. holster
mounted, shoulder straps, etc.

Figure 11 Hip-Flip Accessory

#1 flat head screwdriver is not supplied by LXE. A waist belt accessory can be ordered
from LXE.
Never use the MX3X in the hip-flip without first securing the device to the hip-flip
with the screws.
13
MX3X User's Guide