Bluetooth
Bluetooth
Access:
or
Tap the Bluetooth icon in the taskbar to open the LXEZ Pairing application.
Bluetooth is an option and may not be available on all devices. The MX3X default Bluetooth
hardware setting is On.
The LXE Bluetooth
devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All
other Bluetooth devices are ignored.
Prerequisite
The Bluetooth remote device should be as close as possible, and in direct line of sight, with the
MX3X during the pairing process.
Initial Use
1. Select Start | Settings | Control Panel | Bluetooth.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth
4. Check or uncheck the Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
E-EQ-MX3XRG-L
| Settings | Control Panel | Bluetooth or Bluetooth icon in taskbar
®
module is designed to Discover and pair with nearby LXE Bluetooth
The LXE Bluetooth devices (printers and/or scanners) have been setup to allow
them to be "Discovered" and "Connected/Paired". The System Administrator is
familiar with the pairing function of the Bluetooth devices.
Figure 1-26 Bluetooth LXEZ Pairing Display
MX3X default name is determined by the LXE factory installed software version. LXE
strongly urges assigning every MX3X a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
39
MX3X Reference Guide