Connect External Power Supply To Mx3X Or Cradle (Optional); Figure 1-9 Us Ac/Dc 12V Power Supply And Automotive Power Adapter; Figure 1-10 International Ac/Dc 12V Power Supply; Figure 1-11 Connect External Power Supply - LXE MX3X Reference Manual

12

Connect External Power Supply to MX3X or Cradle (Optional)

There are three external power supplies available for the mobile device and the MX3 desktop
cradle:
• US AC/DC 12V Power Supply
• Cigarette Lighter Adapter
• International AC/DC 12V Power Supply

Figure 1-9 US AC/DC 12V Power Supply and Automotive Power Adapter

The DC power jack is located on the endcap. The standard MX3 cradle power jack is located on
the back of the cradle (the passive vehicle cradle does not have a power jack).
1. Insert the barrel connector into the power jack on the endcap and push in firmly.
2. The CHGR LED above the keypad illuminates when the mobile device is receiving
external power through the power jack.
Note:
See section titled "LED Functions" for explanations of the LEDs for the BATT B and BATT M
illuminations.
MX3X Reference Guide

Figure 1-10 International AC/DC 12V Power Supply

Figure 1-11 Connect External Power Supply

When the mobile device is receiving external power through a powered cradle, the
cradle's Status LED and the mobile device's CHGR LED are illuminated.
Getting Started
E-EQ-MX3XRG-L