Led Functions; Figure 2-15 Led Functions - LXE MX3X Reference Manual

70

LED Functions

Across the top of the keypad are LEDs that provide visual cues to current computer operation.
When the LED is not illuminated, the function is inactive.
LED
nd
2
ALT
CTRL
SHFT
CAPS
SCNR
BATT
B
STAT
BATT
M
CHGR
MX3X Reference Guide

Figure 2-15 LED Functions

When illuminated ...
nd
The next keypress is a 2
•
Amber when on
•
Blinks amber during configuration key sequence.
The next keypress is an ALT keypress.
•
Amber when on and unlit when off.
The next keypress is a CTRL keypress.
•
Amber when on and unlit when off.
The next letter is the uppercase letter on alpha keys and the shifted character on the
numeric keypad keys.
•
Amber when on and unlit when off.
Uppercase letters are active until the CAPS key sequence is pressed again.
•
Amber when on and unlit when off.
Barcode scanner function, affected by both tethered scanners and the scanner
endcap.
•
Red – scanning.
•
Green – good scan.
•
Unlit – scanner is inactive.
Backup Battery. When illuminated, the backup battery is charging. When unlit, the
backup battery is not charging
Status Indicator.
•
Amber – device is booting up.
•
Blinking Green when display Suspend state begins.
Main Battery. When illuminated, main battery capacity is low.
•
Red – low battery.
•
Blinking Red – power fail.
•
Unlit – Main battery is not low OR all charge is depleted in both batteries..
Charger. When on, the mobile device is receiving external power either from the DC
power jack or the MX3X is seated in a powered cradle.
•
Red – Main battery is charging.
•
Amber – Fault or temporary standby (Contact LXE Customer Support).
•
Green – battery charge is complete and the mobile device is connected to
external power through the power jack or a powered cradle.
keypress.
The Keypad
E-EQ-MX3XRG-L