Attach Hand Strap (Optional); Figure 31 Mx3 With Handstrap Installed - LXE MX3 User Manual

Hide thumbs Also See for MX3:

Table of Contents

Attach Hand Strap (Optional)

An elastic handstrap is available for the MX3. Once installed, the handstrap provides a means for

the user to secure the computer to their hand. It is adjustable to fit practically any size hand and

does not interfere with battery charging when the MX3 is in a cradle.

Tool Required: #1 Phillips Screwdriver

Installation

1. Remove the MX3 from the docking station.

2. Put the unit in Suspend mode or turn the unit off to prevent accidental key presses when you

are attaching the handstrap.

3. Place the MX3, with the screen facing down, on a flat stable surface.

4. Attach the hand strap to the MX3 with the screws and washers provided.

5. Test the strap's connection making sure the MX3 is securely connected to each end of the

strap.

E-EQ-MX3OGWW-F-ARC

MX3 User's Guide

Table of Contents