Attach To Hip-Flip (Optional); Figure 1-9 Hip-Flip Accessory - LXE MX3-CE Reference Manual

12

Attach to Hip-Flip (Optional)

Note:
Once the MX3-CE is attached to the hip-flip and the hip-flip securely fastened to the user by a
belt around their waist, the MX3-CE can be operated at a convenient height, leaving the user's
hands free.
The hip-flip adjusts downward to allow removing and replacing the main battery without
removing the unit from the hip-flip or the user's body.
The MX3-CE must be removed from the hip-flip before being placed in a docking station.
Caution:
Installation
1. If the MX3-CE has a handstrap, remove the handstrap and set it aside along with the
handstrap screws and washers.
2. Slide the MX3-CE into the pocket in the hip-flip, making sure the keypad is up and the
endcap ports are visible in the openings at the base of the hip-flip.
3. Place the MX3-CE (in the hip-flip) on a flat stable surface with the keypad down.
4. Tighten the assembly with the black screws provided, using the holes once used for the
handstrap on the MX3-CE.
5. Test the hip-flip's connection making sure the MX3-CE is securely attached.
6. Slide the waist-belt through the loop in the hip-flip and secure the belt around your body.
MX3-CE Reference Guide

Figure 1-9 Hip-Flip Accessory

#1 flat head screwdriver are not supplied by LXE. A waist belt can be ordered from LXE.
Never use the MX3-CE in the hip-flip without first securing the unit to the hip-flip
with the screws.
Getting Started
E-EQ-MX3CERG-G-ARC