Summit Client Configuration; Summit Client Utility; Help; Figure 5-1 Summit Client Utility - LXE MX3X Reference Manual

174

Summit Client Configuration

Note:
Start the Summit Client configuration by tapping the Summit Client Utility icon on the desktop.
You can also start the Summit Client utility by tapping Start | Programs | Summit | SCU.
Important: Tap the Commit button and perform a Warm Reset after adding a new profile or
changing parameters of an existing profile to save the changed parameters in the registry.
Perform a Warm Reset by using the Power key to first Suspend then Resume the mobile device.
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation.
For regulatory domains in which the U-NII 3 band is allowed, the following channels are
supported: 149, 157 and 161. The AP must be configured accordingly.

Summit Client Utility

Access:
The Main tab provides information, admin login and active config (profile) selection.
Profile specific parameters are found on the Config or Profile tab. The parameters on this tab can
be set to unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot and observe the client connection. All functions
may not be available in all releases.Contact your LXE representative for upgrades as they become
available.
Global parameters are found on the Global or Global Settings tab. The values for these
parameters apply to all profiles.

Help

Help is available by clicking the ? button in the title bar on most SCU screens.
SCU Help may also be accessed by selecting Start | Help and tapping the Summit Client Utility
link. The SCU does not have to be open to view the help information using this option.
MX3X Reference Guide
Summit Client Utility Icon
Terminology used on your screen displays may be different than those shown in the
figures in this chapter.
Start | Programs | Summit | SCU or
SCU Icon on Desktop or
Summit Tray Icon (if present) or
WiFi icon in the Windows CE Control Panel (if present)

Figure 5-1 Summit Client Utility

Summit Client Configuration
E-EQ-MX3XRG-L