MX3X CE .NET 4.2
Battery
Access:
View the status of the Main and Backup batteries.
The Battery tab shows the status and the percentage of power left in the main battery. It also
shows the status of the backup battery. The listed values cannot be changed by the user.
LXE recommends Discharging and Recharging the backup battery twice a year. Use the Charge or
Discharge buttons to charge and discharge the backup battery:
To Charge
To Discharge
The Main Battery is charged only when an AC adapter is connected via the endcap, the MX3X is
docked in a powered cradle or when the Main Battery is removed from the MX3X and placed in
the MX3 Multi-charger.
Bluetooth Manager (Obsolete)
Note:
Access:
Set the parameters for a Bluetooth radio.
Tap the Scan Device button to locate Bluetooth devices in your wireless area. Tap the "?" button
and follow the instructions in the Help file to authenticate Bluetooth devices in your area.
E-EQ-MX3XRG-L
Start | Settings | Control Panel | Battery
Battery
Battery
Voltage:
Main:
12.121 V (raw=3485)
Backup:
5.099 V (raw=2167)
Charge
Tap the Charge button. The Discharge button text changes to "Off". When the
backup battery is charging, tap the Off button to stop the Charge process.
Tap the Discharge button. The Charge button text changes to "Off". When the
backup battery is discharging, tap the Off button to stop the Discharge process.
'Bluetooth Manager' support is not available for all MX3X devices or in all MX3X
software releases. See previous section titled "Bluetooth". Contact your LXE
representative for software upgrade options.
Start | Settings | Control Panel | Bluetooth Device Properties
Factory Default Settings
All Found Devices
Status:
Jacked
Discharge
Battery
Untrusted
269
MX3X Reference Guide