Advertisement
27
Dropout time
Control voltage for the module
IO216
Maximum permitted voltage
The binary inputs contain interference suppression capacitors. To ensure EMC immunity, use the terminals
shown in the terminal diagrams/connection diagrams to connect the binary inputs to the common potential.
Relay Outputs
12.1.4
Standard Relay (Type S)
Making capacity
Breaking capacity
AC and DC contact voltage
Permissible current per contact (continuous)
Permissible current per contact (switching on and
holding)
Short-time current across closed contact
Total permissible current for contacts connected to
common potential
Switching time OOT (Output Operating Time)
Additional delay of the output medium used
Max. rated data of the output contacts in accordance
with UL certification
Interference suppression capacitors across the
contacts
Fast Relay (Type F)
Making capacity
Breaking capacity
AC and DC contact voltage
27
For time-critical applications with low-active signals, consider the specified dropout times. If necessary, provide for active discharge
of the binary input (for example, a resistor in parallel to the binary input or using a change-over contact).
SIPROTEC 5, Merging Unit 6MU85, Manual
C53000-G5040-C074-1, Edition 01.2020
Capacitive load (supply-line capaci-
tance)
< 5 nF
< 10 nF
< 50 nF
< 220 nF
Range for 220 V control voltage
Threshold pickup
Threshold dropout
DC 300 V
Max. 1000 W (L/R = 40 ms)
Max. 3600 VA (power factor ≤ 0.35, 50 Hz to 60 Hz)
Max. 30 W (L/R = 40 ms)
Max. 360 VA (power factor ≤ 0.35, 50 Hz to 60 Hz)
250 V
5 A
30 A for 1 s (make contact)
250 A for 30 ms
5 A
Make time: typical: 8 ms; maximum: 10 ms
Break time: typical: 2 ms; maximum: 5 ms
DC 24 V, 5 A, General Purpose
DC 48 V, 0.8 A, General Purpose
DC 240 V, 0.1 A, General Purpose
AC 240 V, 5 A, General Purpose
AC 120 V, 1/6 hp
AC 250 V, 1/2 hp
B300
R300
4.7 nF, ± 20 %, AC 250 V
Max. 1000 W (L/R = 40 ms)
Max. 3600 VA (power factor ≤ 0.35, 50 Hz to 60 Hz)
Max. 30 W (L/R = 40 ms)
Max. 360 VA (power factor ≤ 0.35, 50 Hz to 60 Hz)
250 V
Technical Data
12.1 General Device Data
Dropout time
< 3 ms
< 4 ms
< 5 ms
< 10 ms
158 V to 170 V
132 V to 154 V
793
Advertisement
