Keys Function Description - Smartgen MGC310 User Manual

4.2 KEYS FUNCTION DESCRIPTION

Icons Function
Stop/On
Auto
Start
Down/Decrease
Up/Increase
Manual/Confirm
Test/Confirm
MGC300 Series Genset Controller User Manual
Table 3 Keys Description
Stop the running genset both in manual mode and in auto mode;
In alarm status, press this button to reset any shutdown alarms;
In stop mode, press this button and Up to test if LCD icons and LED
indicators are OK;
In stop mode, press this button and Down to set backlight always on;
In stop process, re-press this button to stop generator immediately;
In parameter setting process, press this button to exit the setting quckly;
In stop status, press this button to start;
In start status, press longer for 3s and release to stop;
Press this key and controller enters to Auto mode; under this mode,
genset can be controlled by remote start input signals;
Press this key and genset will start;
LCD page scroll;
In parameter settings, decrease the value where
the cursor is;
LCD page scroll;
In parameter settings, increase the value where
the cursor is;
Confirm key for parameter settings page;
Manual key for other pages and press it to make controller in Manual
mode;
This key is especially for MGC310;
Confirm key for parameter settings page;
Test key for other pages and press it to make controller commissoning;
This key is especially for MGC320.
Description
Press the two keys
simultaneously to enter
parameter
page;
settings
Page 8 of 26