Disassembly; Inspection - Chery A1 2009 Service Manual

Disassembly

1. Remove the camshaft bearing cap bolts.
NOTE: Equally loosen camshaft bearing cap bolts
in several steps.
2. Remove the camshaft bearing caps and place
them in proper order.
NOTE: The camshaft bearing caps are marked for
identification.
3. Remove the camshafts and then remove the cam-
shaft seals.

Inspection

• Measure the camshaft cam lobe height.
• If wear is beyond the limit, replace the camshaft.
Intake Cam Lobe Height
Exhaust Cam Lobe Height
70
02–
CYLINDER HEAD UNIT REPAIR
CAMSHAFT CAM LOBE HEIGHT
37.11 mm
37.09 mm
Chery Automobile Co., Ltd.
BESM020035
BESM020037