Side Turn Signal Lamp
Removal & Installation
1. Disconnect the negative battery cable.
2. Gently pry the side turn signal lamp (1) loose from
the front fender.
3. Disconnect the side turn signal lamp electrical con-
nector (2).
4. Replace the bulb.
5. Installation is in the reverse order of removal.
License Plate Lamp
Removal & Installation
1. Using a plastic trim stick, remove the license plate
lamp (1).
2. Disconnect the license plate lamp electrical connector.
3. Replace the bulb.
4. Installation is in the reverse order of removal.
210
15–
EXTERIOR LAMPS
Chery Automobile Co., Ltd.
PZSM150094
PZSM150168