Chery A1 2009 Service Manual page 748

SPIRAL
RCM
CABLE
TERMINAL
TERMINAL
2 11
• Continuity should exist.
Is the check result normal?
Yes >>
Go to the next step.
No >>
Replace the driver airbag circuit between the RCM electrical connector terminals and the spiral cable
electrical connector terminals.
4.
CHECK DRIVER AIRBAG CONTROL CIRCUITS
WARNING!
To avoid serious or fatal injury, turn the ignition switch off, disconnect the negative battery cable and wait two
minutes before proceeding.
• Check the continuity of the driver airbag circuit between the driver airbag electrical connector terminal 1 and the
spiral cable electrical connector terminal 1.
SPIRAL DRIVER
CABLE AIRBAG
TERMINAL TERMINAL
1 1
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
CONTINUITY
Yes
CONTINUITY
Yes
14
25
14–