On-Vehicle Service - Chery A1 2009 Service Manual

Immobilizer Control Module
Removal & Installation
1. Remove the steering column shroud lower retain-
ing bolts (1).
2. Remove the Immobilizer control module retaining
bolt (1).
3. Disconnect the Immobilizer control module electri-
cal connectors (2).
4. Remove the Immobilizer control module.
5. Installation is in the reverse order of removal.
Installation Notes:
NOTE :
The Immobilizer control module must be matched to the ECM before the vehicle will start.
148
15–

ON-VEHICLE SERVICE

Chery Automobile Co., Ltd.
PZSM110011
PZSM150101