Chery A1 2009 Service Manual page 658

Table of Contents

Advertisement

7.
CHECK RIGHT REAR WHEEL SPEED SENSOR GROUND CIRCUIT FOR A SHORT TO VOLTAGE
• Check the voltage between terminal 1 of the Right Rear wheel speed sensor connector A-022, terminal side
and ground.
• Voltage should not exist.
Is the check result normal?
Yes
>>
Go to the next step.
No
>>
Repair or replace the circuit for a short to battery.
8.
CHECK DTC
• With the X-431 scan tool, read the ABS module DTCs.
• Refer to DTC Confirmation Procedure .
Is DTC C1209 present?
Yes
>>
Replace the ABS module (See ABS Module Removal & Installation in Section 12 Brakes).
No
>>
The system is now operating properly.
Erase all codes and test drive the vehicle to verify the repair is complete.
68
12–
DIAGNOSIS & TESTING
Chery Automobile Co., Ltd.

Advertisement

Table of Contents
loading

Table of Contents