Chery A1 2009 Service Manual page 975

5. Remove the front combination lamp assembly
carefully.
6. Installation is in the reverse order of removal.
Headlamp Adjustment Procedure
NOTE :
Follow all local laws and regulations and verify the following items before adjustment:
1. Check the following before starting the headlamp adjustment procedure:
• All tires are filled to the proper tire pressure.
• The vehicle is unloaded (except for spare tire and tools, and include driver's weight for sedan).
• The vehicle should be parked on a level surface.
• The headlights are clean.
• The headlights are working properly.
2. Park the vehicle on a level surface approximately 10 meters from the vertical wall or screen directly in front of it.
NOTE: The vertical wall or screen must be a minimum of 2.4 meters wide.
3. Use a screwdriver into the two adjustment holes
(1) to adjust the headlamp to proper specifications.
206
15–
EXTERIOR LAMPS
1
2
3
4
5
High Beam Lamp
Bulb 12 V (65 W)
Front Position
Lamp Bulb
Horizontal Adjusting Nut
Low Beam Lamp
12 V (55 W)
Bulb
Vertical Adjusting Nut
Front Turn Signal
12 V (21 W)
Lamp Bulb
Chery Automobile Co., Ltd.
12 V (5 W)
PZSM150214
PZSM150213