Assembly - Chery A1 2009 Service Manual

Assembly

NOTE :
• Always have clean hands when assembling a brake caliper.
• Always use fresh, clean brake fluid when assembling a brake caliper.
• Never use an old piston seal.
• Bleed the brakes as necessary.
Perform the following procedure to assemble the brake caliper:
1. Lubricate the caliper piston, piston seals and piston
bore with clean brake fluid.
2. Install the new piston seal into the seal groove.
NOTE :
Verify seal is fully seated into seal groove and not
twisted.
Chery Automobile Co., Ltd.
UNIT REPAIR
LTSM120014
12
23
12–