Crankshaft; Specifications; Disassembly - Chery A1 2009 Service Manual

4. Using a feeler gauge, check connecting rod side clearance.
• Check axial clearance of connecting rod.

Crankshaft

Specifications

Torque Specifications
DESCRIPTION
Main Bearing Cap Bolts
Lower Cylinder Block Bolts
Clearance Specifications
DESCRIPTION
Diameter of Crankshaft Main Journals
Diameter of Crankshaft Rod Journals
Out-of-Round Maximum of Crankshaft Main Journals
Axial Clearance of Crankshaft
Radial Clearance of Crankshaft
Coaxality Crankshaft Main Journal
Thrust Washer Thickness

Disassembly

1. Remove the front crankshaft oil seal (See Front Crankshaft Oil Seal Removal & Installation in Section 02
Engine).
2. Remove the rear crankshaft oil seal (See Rear Crankshaft Oil Seal Removal & Installation in Section 02 Engine).
3. Remove the pistons with connecting rod assemblies.
Chery Automobile Co., Ltd.
ENGINE UNIT REPAIR
2nd Step: Tighten the bolt an additional 180 ± 10°
TORQUE (N·m)
1st Step: Tighten the bolt to 45 ± 5 N·m
25 ± 5
SPECIFICATION (mm)
46.01
44.485 - 44.495
0.008
0.02 - 0.30
0.0035 - 0.034
0.05
2.4 - 2.405
02
BESM020064
63
02–