Table of Contents
Advertisement
4. Troubleshooting
4.5.5.4. Adjustment
Print Adjustment
•
Diagnostics > Adjustment > Print Adjustment > Automatic Adjustment
Purpose
Operation Procedure
4-45
To calibrate/adjust the lengths of vertical & horizontal image and image position automatically in
print engine.
1) Press "Paper Supply" button and select a tray.
2) Press "Paper Size" button and select a paper size of the previously selected tray.
3) Press "Print" button. A test pattern will be printed out.
4) Place the printed pattern on platen.
•
The words "front side" on the chart face the glass
•
The arrows face left edge of the platen
•
Press "Scan 1"
5) Press "OK" button. Automatic scanning will occur .
6) Place the printed pattern on platen.
•
The words "back side" on the chart face the glass
•
The arrows face left edge of the platen
•
Press "Scan 2"
7) Press "OK" button. Automatic scanning will occur .
8) The system will automatically calculate the proper value based on scanning result of the
test pattern.
9) The new values are set to the system.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
