Fdb Board; Fuser_Exit Drive Unit - Samsung MultiXpress K4 Series Service Manual

3. Disassembly and Reassembly

3.3.10. FDB board

1. Remove the rear cover. (Refer to 3.3.2) 3. Unplug all connectors on FDB board. Remove 4
screws. And remove the FDB board.
2. Remove the SMPS cover after removing 4 screws.

3.3.11. Fuser_Exit Drive Unit

1. Remove the rear cover. (Refer to 3.3.2)
2. Unplug 2 connectors. Remove 4 screws. And remove
the Fuser/Exit Drive unit.
Copyright© 1995-2017 SAMSUNG. All rights reserved. 3-28