Samsung MultiXpress K4 Series Service Manual page 368

A3 mono copier

Table of Contents

4. Troubleshooting

► Error Code

► Error message

Staple cartridge is low. Replace it.

Staple cartridge is empty. Replace it.

Finisher stapler cartridge is necessary to refill.

► Troubleshooting method

1) Open finisher stapler door to refill cartridge and then close door. Self-Priming will be executed automatically if

necessary. If stapler error or warning does not disappear, follow the instructions below :

2) Does finisher stapler cartridge refill box equip well?

a) Make sure stapler refill box equip well into cartridge. (JC81-07408A)

b) Make sure staples doesn't jam near stapler head.

3) Does finisher stapler input sensor work well?

a) Make sure finisher input sensor cable is connected well to the sensor connector.

b) Make sure finisher input sensor cable is connected well to the main board connector.

c) Replace the finisher stapler(JC81-07917A).

d) Replace the finisher main board.

Troubleshooting