Diagnostics; Engine Diagnostics - Samsung MultiXpress K4 Series Service Manual

4. Troubleshooting

4.5.5. Diagnostics

4.5.5.1. Engine Diagnostics

Engine NVM Initialization
•
Diagnostics > Engine Diagnostics > Engine NVM Initialization
This menu initializes all engine NVM value to the default.
Engine NVM Read/Write
•
Diagnostics > Engine Diagnostics > Engine NVM Read/Write
Purpose To change a configuration value for engine firmware.
Operation When the main "NVM Read/Write" window displays, users can navigate through the list of codes with
Procedure descriptions and saved values.
Users can also input a code to the text box to find a configuration value directly.
After selecting one value, pressing "Edit" button will open an interface for user input.
Code Display
103-0031 Regi Curl Length
103-0032 Duplex Regi Curl Length
103-0033 Double Speed Duplex Regi Curl Length
109-0000 StandBy Temperature offset
109-0005 Warmup Temperature offset
109-0010 Run Temperature offset
109-0055 Thin Temperature offset
109-0065 Plain Temperature offset
109-0070 Bond Temperature offset
109-0090 Cardstock Temperature offset
109-0100 Envelopes Temperature offset
109-0110 Labels Temperature offset
109-0130 Thick Temperature Offset
109-0131 Recycled Temperature offset
109-0132 Special Temperature offset
111-0030 Toner Vcon Black
4-31
Meaning
Buckle Control : Regi On Curl
Buckle Control : Duplex Regi On Curl
(x1)
Buckle Control : Duplex Regi On Curl
(x2)
Target Temperature during standby mode.
Target Temperature during warmup Mode.
Target Temperature during run mode.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Media type offset for fuser roll temperature.
Toner Vcon Black
Copyright© 1995-2017 SAMSUNG. All rights reserved.
Default Max/Min
0 6 / -3
0 6 / -3
0 6 / -3
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 5 / -5
0 13/-13