Adjustment; Print Adjustment - Samsung SCX-82x0 series Service Manual

4.5.4. Adjustment

4 5 4 Adj t

4.5.4.1. Print Adjustment

• Diagnostics > Adjustment > Print Adjustmen
Purpose
Operation
Procedure
Verification
Specification
Service Manual
t
To correct image position of prin
1. Press "Paper Supply" button
2. Press "Paper Size" button a
tray.
3. Press "Print" button. A test p
4. Press "Next" button. The sy
5. Locate the front side of Sca
ADF cannot be used.
6. Press OK button. Automa 6 Press "OK" button Automa
7. Locate the back side of Sca
press "OK" button once mo
8. The system will automatica
result of the test pattern.
9. The new value s are set to t
Print out and check if all the pos
located within the specified limit located within the specified limit
ⓐ,ⓑ,ⓔ,ⓕ : 10mm, ± 1.5mm
Front Side o de
4.Servic ce Mode
nt > Automatic Adjustment
nt-outs automatically.
n and select a tray.
and select a paper size of the previously selected
pattern will be printed out.
ystem ask to locate the test pattern.
nner A/S Chart at the scanner glass . Note that
atic scanning will occur . atic scanning will occur
anner A/S Chart at the scanner glass again and
ore.
ally calculate the proper value based on scanning
the system.
sition of scale marks (ⓐ,ⓑ,ⓔ,ⓕ) in the image are
t. t.
4-2 27
Back Side ac de
SAMSUNG ELECTRONICS