Ethernet Connectors (J14-15); Jtag Connector (P1); Expansion Interface Ii Connectors (P2 And P4) - Analog Devices EZ-Board ADSP-BF518F Manual

Ethernet Connectors (J14–15)
Part Description
RJ-45 Ethernet jack
Cat 5E patch cable

JTAG Connector (P1)

The JTAG header is the connecting point for a JTAG connection to the
ADSP-BF518F processor. The standalone debug agent requires both con-
nectors and
P1
Pin 3 is missing to provide keying. Pin 3 in the mating connector should
have a plug.
When using an emulator with the EZ-Board, the standalone debug agent
must be removed. Follow the installation instructions provided in
"EZ-Board Installation" on page
point.

Expansion Interface II Connectors (P2 and P4)

and are board-to-board connectors providing signals for the SPI,
P2 P4
TWI, UART, SPORT interfaces and GPIO signals of the processor. The
connectors are located on the upper and lower edges of the board. For
more information, see
ability and pricing of the connectors, contact Samtec.
Part Description
50-position 0.1", SMT header
A D S P - B F 5 1 8 F E Z - B o a r d E v a l u a t i o n S y s t e m M a n u a l
ADSP-BF518F EZ-Board Hardware Reference
Manufacturer
STEWART
Mating Cable (shipped with the EZ-Board)
RANDOM
.
ZP1
"Expansion Interface II" on page
Manufacturer
SAMTEC
1-4, using as the JTAG connection
P1
Part Number
SS-6488-NF
PC10/100T-007
1-23. For avail-
Part Number
TSSH-125-01-L-DV-A
2-27