Adsp-Bf518F Ez-Board Hardware Reference - Analog Devices EZ-Board ADSP-BF518F Manual

2 ADSP-BF518F EZ-BOARD
HARDWARE REFERENCE
This chapter describes the hardware design of the ADSP-BF518F
EZ-Board board.
The following topics are covered.
• "System Architecture" on page 2-2
Describes the ADSP-BF518F EZ-Board configuration and explains
how the board components interface with the processor.
• "Programmable Flags" on page 2-3
Shows the locations and describes the programming flags (PFs).
• "Push Button and Switch Settings" on page 2-7
Shows the locations and describes the push buttons and switches.
• "Jumpers" on page 2-16
Shows the locations and describes the configuration jumpers.
• "LEDs" on page 2-21
Shows the locations and describes the LEDs.
• "Connectors" on page 2-24
Shows the locations and provides part numbers for the on-board
connectors. In addition, the manufacturer and part number infor-
mation is provided for the mating parts.
ADSP-BF518F EZ-Board Evaluation System Manual 2-1