4.1 DLL Function Definition and Description
All the functions provided in the I8124_eVC.DLL or I8124_DotNET.DLL
are listed in the following table and detail information for each function is
presented in the next sub-section.
descriptions more simply and clearly, the attributes for the both input and
output parameter functions are given as [input] and [output] respectively, as
shown in the following table.
Keyword
[ input ]
[ output ]
Table 4.1.1 Functions Table (Module Functions)
Function Name
No.
1
I8124_TotalI8124Module
2
I8124_ActiveModule
3
I8124_CloseModule
4
I8124_GetDLLVersion
Table 4.1.2 Functions Table (Firmware Functions)
Function Name
No.
1
I8124_GetFirmwareVersion
2
I8124_ResetFirmware
I-8124W DeviceNet Master API functions User's Manual (V 1.6)
Set parameter by user
before calling this function?
Yes
No
However, in order to make the
Get the data from this parameter
after calling this function?
Description
Get total I-8124W modules in the MCU
Make I-8124W module active
Close all the I-8124W modules
Get the DLL version of the I8124_eVC.DLL
or I8124_DotNET.DLL
Description
Get the version of the firmware inside the
I-8124W module
Reset the firmware in the I-8124W module
2021/10/04
No
Yes
41