I8124_Resetfirmware - ICP DAS USA I-8124W User Manual

Devicenet master module

Table of Contents

4.3.6 I8124_ResetFirmware



Description:

The function is used to reset the I-8124W firmware. When users have

changed the baud rate of CAN bus or changed the Master's MAC ID, the

function must be called to make the modification enable. After calling this

function, users should wait for 2 seconds to make the firmware boot up

completely.



Syntax:

DWORD I8124_ResetFirmware (BYTE cSlot)



Parameter:

cSlot: [input] The slot number which the I-8124W is plugged in.



Return:

Please refer to the chapter 4.2 for the function return code.

I-8124W DeviceNet Master API functions User's Manual (V 1.6)

2021/10/04

Table of Contents