5.3 Description of the Buttons and Fields
Here is the description of the buttons in the software utility.
5.3.1 Total Module Number
This field shows the total number of the I-8124W module in the WP-8000.
The utility will detect the I-8124W hardware automatically when starting up. If
the number is 0, users can not use this software. Please check the installation
of the I-8124W module.
5.3.2 Slot Number
This shows which slot the I-8124W has been plugged in. The drop-down list
will show the entire slots which the I-8124W module plugged in the WP-8000.
5.3.3 Active Module
This button could activate the I-8124W hardware which is selected in the
"Slot No" field. Users should click this button before using other functions.
5.3.4 Reset Firmware
This button can restart the firmware of the I-8124W. If users have
changed the baud rate or the MAC ID of the I-8124W, you must restart
firmware to make the modification enable.
5.3.5 Search All Device
This button can search all the slave devices in the network.
I-8124W DeviceNet Master API functions User's Manual (V 1.6)
2021/10/04
109