1.
Introduction
1.1
Preface
First we would like to welcome you as a customer of KEB and congratulation to the purchase
of this product. You have decided for a product on highest technical niveau.
The enclosed documents as well as the indicated hard- and software are developments of
the KEB Automation KG. Errors excepted. KEB Automation KG has created these docu-
ments and the hard- and software to the best of knowledge, but they assume no liability that
the specifications will provide the benefits sought by the user. KEB Automation KG reserves
the right to change specifications without prior notice or to inform third parties. This list is not
exhaustive.
The used pictograms have following significance:
1.2
Product description
This instruction manual describes the power supply and regenerative unit KEB COMBIVERT
R6-S. The COMBIVERT R6-S has the following features.
In power supply operation
•
converts a three-phase input voltage into DC voltage.
•
supplies single KEB frequency inverter or via DC interconnection.
•
can be parallel connected if higher power supply is required.
In regenerative operation
•
refeeds excess energy from regenerative operation into the supply system.
•
replaces braking resistor and braking transistor.
•
reduces the heat loss dissipation compared to the braking resistor
•
improves the energy balance
•
is environmentally friendly and space-saving
•
is economically
Danger
Warning
Caution
Attention
absolutely observe
Information
Help
Tip
Introduction
GB - 5