Introduction - Will Burt 7-30 HDL Operating Instructions Manual

3

Introduction

Thank you for selecting The Will-Burt Company for your critical payload elevation needs. These
operating instructions describe the installation, operation, transportation, maintenance, storage,
and troubleshooting procedures for the Pneumatic Mast with Remote Locking System (Heavy
Duty, Super Heavy Duty, and Ultra Heavy Duty models). These procedures assume the use of
standard catalog mast systems with a clear anodized finish. Procedures and characteristics for
mast systems customized to meet customer-specific needs may vary. Review this document in
its entirety. Contact The Will-Burt Company with any questions before performing any procedure
outlined in this manual.
The views depicted in this manual are provided for clarification and are subject to change without
notice. Views are not to scale.
The Pneumatic Mast with Remote Locking System comprises of:
• Telescoping mast
• Control System
• Pneumatic System (Sold Separately)
• Mounting Hardware (Sold Separately)
• Additional Accessory Options (Sold Separately)
The Pneumatic Mast with Remote Locking System is available in the following models:
• Heavy Duty Locking Pneumatic Masts
• Super Heavy Duty Locking Pneumatic Masts
• Ultra Heavy Duty Locking Pneumatic Masts
This manual is not for:
• Non-Locking Pneumatic Masts
• Standard Duty Pneumatic Masts
• Pneumatic Masts without the Remote Locking System
Note: Model numbers listed are for catalog masts only. Masts with other heights, capacities, and
finishes are available. For more information on additional mast sizes, capabilities, and finishes,
see www.willburt.com.
TP-5580101-A
FEBRUARY 2022
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
PAGE 17 OF 164