Section 2 Introduction; Safety Precautions - Will Burt Hurry-Up Mast 3.5-7 Operator's Manual

Section 2
Thank you for selecting The Will-Burt Company for your critical payload elevation needs. These
operating instructions describe transporting, handling, installing, operating, maintaining, storing,
and troubleshooting procedures for Hurry-Up® Mast systems. These procedures assume the
use of standard mast systems. Procedures and characteristics for mast systems customized to
meet customer-specific needs may vary. Review this document in its entirety. Contact The Will-
Burt Company with any questions before performing any procedure outlined in this manual.
These operating instructions are intended for professionals who are qualified by their
appropriate training and experience to perform the procedures. Review this document in its
entirety. Contact The Will-Burt Company with any questions before performing any procedure
outlined in this manual.
The views depicted in this manual are provided for clarification and are subject to change
without notice. Views are not to scale.
The following models are covered in these operating instructions:
•
Hurry-Up® Mast 3.5-7
•
Hurry-Up® Mast 5.3-16.4
•
Hurry-Up® Mast 5.8-24.3
•
Hurry-Up® Mast 6.7-30
This manual is not for the following portable masts:
•
Hurry-Up Pump Mast
•
QEAM MTS Series
•
QEAM MTSV Series
•
Ranger Expedition Composite Tripod Masts
•
AntennaMast AM2 Aluminum Tripod Masts

2.1 Safety Precautions

Refer to the Safety Summary for precautions to be observed while operating or servicing this
equipment.
TP-5928001-C
February 2023
Introduction
H -U ® M O
URRY P AST PERATOR
'
M
S ANUAL
2-1