PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
3.3.1.2
Drain Kit (P/N: 902982)
The drain kit provides a means to route draining water away from the mast by attaching one end
of the drain kit to the drain hole and the other end outside the mounting structure area. Water that
has accumulated in the mast should be periodically drained, particularly after the mast has been
exposed to rain, in order to prevent damage.
The drain kit (Figure 3-5) includes:
• (1) Washer ⅜ Inch, ID x ¾, OD x 1/16 Thick (P/N: 900555)
• (1) Lock Nut ⅛ Inch Brass (P/N: 900556)
• (1) ¼ Inch Hose Adaptor (P/N: 900564)
• (1) ¼ Inch Bulkhead Fitting (P/N: 900565)
• 8 Feet (2.4 m), ¼ Inch (6.35 mm) ID, Clear Polyethylene Tube (P/N: 900566)
• (1) Service Sheet 414 (P/N: 4306601) (Not shown)
• (1) Polyethylene Bag 11 x 18, 2 MILS (P/N: 4306301) (Not shown)
From Mast
¼ inch Hose Adaptor
PAGE 24 OF 164
Washer
Lock Nut
8 feet (2.4 m) Clear Polyethylene Tube
Figure 3-5 Drain Kit (P/N: 902982)
¼ inch Bulkhead Fitting
TP-5580101-A
FEBRUARY 2022