Shipping - Will Burt 7-30 HDL Operating Instructions Manual

PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
7.2

Shipping

When shipping the mast system, The Will-Burt Company recommends shipping the mast in the
original shipping crate. If the original shipping crate is not available, contact The Will-Burt
Company to order a replacement.
When shipping:
1. As necessary, remove the payload.
2. As necessary, prepare the mast system for transportation (Section 7.1).
3. As necessary, uninstall the mast system from the mounting structure (Section 5).
4. Secure the mast system in the shipping crate:
a. Carefully position the mast in the crate.
b. When shipping by air, ensure the air inlet port is open.
c. Secure the block at the top of the mast to prevent the mast from shifting in the shipping
crate during transportation.
d. Secure the top half of the wooden mast saddles.
e. As necessary, carefully pack any additional components in the shipping crate.
f. Secure the lid on the shipping crate.
PAGE 138 OF 164 TP-5580101-A
FEBRUARY 2022