Install The Shelf Bracket (Optional) - Will Burt 7-30 HDL Operating Instructions Manual

PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
5.6.2.2

Install the Shelf Bracket (Optional)

To install a shelf bracket (if used):
1. Position the shelf bracket ensuring the shelf bracket is level.
2. Use the shelf bracket as a template to drill holes through the support structure.
3. If necessary, use washers or short spacers made of ¼ inch (6.35 mm) pipe to level out any
irregularities that exist in the support structure.
4. Secure the shelf bracket to the support structure using:
• (4) Bolts
• (4) Flat Washers
• (4) Lock Washers
• (4) Nyloc Nuts
See Section 5.3 for hardware sizing. Ensure the shelf bracket is level in all directions. The
mounting hardware must include proper means to resist vibration loosening such as thread-
locking compound or locking hardware. Torque all hardware as appropriate for its size and
grade
PAGE 84 OF 164 TP-5580101-A
FEBRUARY 2022