Maintenance And Adjustments; Pre-Maintenance Check - Will Burt 7-30 HDL Operating Instructions Manual

8

Maintenance and Adjustments

This section describes maintenance and adjustment procedures required to keep the mast
system operational. Use care to understand and follow all precautions listed in the Safety
Summary in Section 1 while performing these procedures. If the system does not perform as
required, see Section 9.
Disconnect power to any devices mounted to the mast and pneumatic systems with lock-out tag-
out procedures as appropriate before performing mast maintenance.
8.1

Pre-Maintenance Check

Before performing maintenance procedures, ensure:
• All operators read and understand the entire maintenance procedure and are properly
trained.
• The payload is removed prior to performing maintenance on the system.
• The system is level and secure.
TP-5580101-A
FEBRUARY 2022
PNEUMATIC MAST WITH REMOTE LOCKING SYSTEM
OPERATING INSTRUCTIONS
PAGE 139 OF 164