Table of Contents
Advertisement
Section 7
This section describes maintenance procedures required to keep the mast system operational.
Use care to understand and follow all precautions while performing these procedures. If the
system does not perform as required, see Section 8 for troubleshooting.
Disconnect power to any devices mounted to the mast with lock-out tagout procedures as
appropriate before performing mast maintenance.
To order spare or replacement parts, always refer to the mast model number and serial number.
This information is included in the operator's manual supplied with each mast. The mast serial
number is stamped at the bottom of the base tube. Model number, serial number and additional
information is also engraved on the mast identification plate(s). The plate(s) are fixed to the
base tube's collar.
7.1 Pre-Maintenance Check
Before performing maintenance procedures, ensure:
•
All operators read and understand the entire maintenance procedure and are properly
trained.
•
The payload is removed prior to performing maintenance on the system.
•
The system is level and secure.
TP-5928001-C
February 2023
Maintenance and Disposal
H
-U
® M
O
URRY
P
AST
PERATOR
'
M
S
ANUAL
7-1
Advertisement
Table of Contents
