Incontrol - peplink PEPWAVE MAX Series User Manual

Enable
Password
White List

28.9 InControl

InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and
configure your devices automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink
InControl system. This device's usage data and configuration will be sent to the system if you
enable the features in the system.
Alternatively, you can also privately host InControl. Simply check the "Privately Host InControl"
box and enter the IP Address of your InControl Host. If you have multiple hosts, you may enter
the primary and backup IP addresses for the InControl Host and tick the "Fail over to InControl
in the cloud" box. The device will connect to either the primary InControl Host or the
secondary/backup ICA/IC2.
https://www.peplink.com
SMS Control Settings
Click the checkbox to enable the SMS Control.
This setting sets the password for authentication - maximum of 32 characters,
which cannot include semicolon (;).
Optionally, you can add phone number(s) to the whitelist. Only matching phone
numbers are allowed to issue SMS commands. Phone numbers must be in the
E.164 International Phone Numbers format.
276 Copyright @ 2021 Peplink