Bandwidth Allowance Monitoring - peplink PEPWAVE MAX Series User Manual

9.6

Bandwidth Allowance Monitoring

Action
Start Day
Monthly
Allowance
Due to different network protocol overheads and conversions, the amount of data reported by this Peplink device
is not representative of actual billable data usage as metered by your network provider. Peplink disclaims any
obligation or responsibility for any events arising from the use of the numbers shown here.
https://www.peplink.com
Bandwidth Allowance Monitor
If Email Notification is enabled, you will be notified by email when usage hits
75% and 95% of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this
WAN connection will be disconnected automatically when the usage hits the
monthly allowance. It will not resume connection unless this option has been
turned off or the usage has been reset when a new billing cycle starts.
This option allows you to define which day of the month each billing cycle begins.
This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.
Disclaimer
143 Copyright @ 2021 Peplink