Configuration - peplink PEPWAVE MAX Series User Manual

You can sign up for an InControl account at https://incontrol2.peplink.com/. You can register
your devices under the account, monitor their status, see their usage reports, and receive offline
notifications.
28.10 Configuration
Backing up Pepwave router settings immediately after successful completion of initial setup is
strongly recommended. The functionality to download and upload Pepwave router settings is
found at System>Configuration . Note that available options vary by model.
Restore
Configuration to
Factory Settings
Download Active
Configurations
Upload
Configurations
Upload
Configurations
https://www.peplink.com

Configuration

The Restore Factory Settings button is to reset the configuration to factory
default settings. After clicking the button, you will need to click the Apply
Changes button on the top right corner to make the settings effective.
Click Download to backup the current active settings.
To restore or change settings based on a configuration file, click Choose File to
locate the configuration file on the local computer, and then click Upload . The new
settings can then be applied by clicking the Apply Changes button on the page
header, or you can cancel the procedure by pressing discard on the main page of
the web admin interface.
In a high availability (HA) configuration, a Pepwave router can quickly load the
configuration of its HA counterpart. To do so, click the Upload button. After loading
277 Copyright @ 2021 Peplink