Incontrol - peplink Balance One User Manual

Protocol
Privacy Protocol
14.1.8
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and
configure your devices automatically. All of this is now possible with InControl.
When this check box is checked, the device's status information will be sent to the Peplink
InControl system. This device's usage data and configuration will be sent to the system if you
enable the features in the system.
Alternately, you could also privately host InControl. Simply check the box beside the "Privately
Host InControl" open, and enter the IP Address of your InControl Host.
You can sign up for an InControl account at https://incontrol2.peplink.com. You can register your
devices under the account, monitor their status, see their usage reports, and receive offline
notifications.
http://www.peplink.com
● NONE
● MD5
● SHA
When MD5 or SHA is selected, an entry field will appear for the password.
This setting specifies via a drop-down menu one of the following valid privacy
protocols:
● NONE
● DES
When DES is selected, an entry field will appear for the password.

InControl

170 Copyright @ 2017 Peplink