Ignition Sensing; Ignition Sensing Installation - peplink PEPWAVE MAX Series User Manual

24.7 Ignition Sensing

Ignition Sensing detects the ignition signal status of a vehicle it is installed in.
This feature allows the cellular router to start up or shut down when the engine of that vehicle is
started or turned off.
The time delay setting between ignition off and power down of the router is a configurable
setting, which allows the router to stay on for a period of time after the engine of a vehicle is
turned off.

Ignition Sensing installation

Functoin
I/O
IGN I/P
DC IN
-
DC IN
+
* Currently not functional; will be used for additional features in future firmware
https://www.peplink.com
optional*
connected to positive feed on the ignition .
connected to permanent negative feed (ground)
connected to permanent positive feed (power
12VDC, 2A) ).
230
Colour Wire
Brown
Orange
Black
Red
Copyright @ 2021 Peplink