Bandwidth Control; Application - peplink PEPWAVE MAX Series User Manual

20.2 Bandwidth Control

This section is to define how much minimum bandwidth will be reserved to each user group
when a WAN connection is in full load . When this feature is enabled, a slider with two
indicators will be shown. You can move the indicators to adjust each group's weighting. The
lower part of the table shows the corresponding reserved download and uploads bandwidth
value of each connection.
By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20% for
Guest.
You can define a maximum download speed (over all WAN connections) and upload speed (for
each WAN connection) that each individual Staff and Guest member can consume. No limit can
be imposed on individual Managers. By default, download and upload bandwidth limits are set
to unlimited (set as 0) .

20.3 Application

20.3.1 Application Prioritization
On many Pepwave routers, you can choose whether to apply the same prioritization settings to
all user groups or customize the settings for each group.
, ━
Three application priority levels can be set: ↑ High Normal , and ↓ Low . Pepwave routers can
detect various application traffic types by inspecting the packet content. Select an application by
choosing a supported application, or by defining a custom application manually. The priority
preference of supported applications is placed at the top of the table. Custom applications are at
https://www.peplink.com 197 Copyright @ 2021 Peplink