Upnp / Nat-Pmp Settings - peplink PEPWAVE MAX Series User Manual
For more information, please visit peplink.com
Hide thumbs
Also See for PEPWAVE MAX Series:
- User manual (284 pages) ,
- User manual (436 pages) ,
- User manual (208 pages)
Table of Contents
Advertisement
Inbound IP
This setting specifies the WAN connections and Internet IP address(es) from which
Address(es)
the service can be accessed.
Server IP
This setting specifies the LAN IP address of the server that handles the requests for
Address
the service.
18.1 UPnP / NAT-PMP Settings
UPnP and NAT-PMP are network protocols which allow a computer connected to the LAN port
to automatically configure the router to allow parties on the WAN port to connect to itself. That
way, the process of inbound port forwarding becomes automated.
When a computer creates a rule using these protocols, the specified TCP/UDP port of all WAN
connections' default IP address will be forwarded.
Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features only
if you trust the computers connected to the LAN ports.
When the options are enabled, a table listing all the forwarded ports under these two protocols
can be found at Status > UPnP / NAT-PMP .
https://www.peplink.com
193
Copyright @ 2021 Peplink
Advertisement
Table of Contents
