Appendix D: Declaration - peplink PEPWAVE MAX Series User Manual

Appendix D: Declaration

FCC Requirements for Operation in the United States
Federal Communications Commission (FCC) Compliance Notice:
For MAX BR1 Mini
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
FCC Caution Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. IEEE 802.11b or 802.11g
operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
FCC Radiation Exposure Statement (for MAX BR1 mini)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
https://www.peplink.com 315 Copyright @ 2021 Peplink