The Incontrol Method 1; Time 1; Schedule - peplink ONE One User Manual

A prompt will be displayed advising to download the Current Active Configuration. Please click on the
underlined download text. After downloading the current config click the Ok button to start the upgrade
process. The firmware will now be applied to the router*. The amount of time it takes for the firmware to
upgrade will depend on the router that's being upgraded.
*Upgrading the firmware will cause the router to reboot.
The InControl method
Described in this knowledgebase article on our forum.
16.1.3 Time
The time server functionality enables the system clock of the Peplink Balance to be synchronized with a
specified time server. The settings for time server configuration are located at S ystem>Time .
This specifies the time zone (along with the corresponding Daylight Savings Time scheme)
in which Peplink Balance operates. The T ime Zone value affects the time stamps in the
Time Zone
event log of the Peplink Balance and e­mail notifications. Check S how all to show all time
zone options.
Time Server
This setting specifies the NTP network time server to be utilized by the Peplink Balance.
16.1.4 Schedule
Enable and disable different functions (such as WAN connections, outbound policy, and firewalls at
different times, based on a user­scheduled configuration profile. The settings for this are located at
System > Schedule
https://www.peplink.com
Time Settings
194 Copyright @ 2019 Peplink