Mounting The Unit; Wall Mount; Car Mount; Ip67 Installation Guide - peplink PEPWAVE MAX Series User Manual

For more information, please visit peplink.com

Hide thumbs Also See for PEPWAVE MAX Series:

Table of Contents

Mounting the Unit

The Pepwave MAX 700/HD2/On-The-Go can be wall mounted using screws. After adding the

screw on the wall, slide the MAX in the screw hole socket as indicated below. Recommended

screw specification: M3.5 x 20mm, head diameter 6mm, head thickness 2.4mm.

The Pepwave MAX BR1 requires four screws for wall mounting.

The Pepwave MAX700/HD2 can be mounted in a vehicle using the included mounting brackets.

Place the mounting brackets by the two sides and screw them onto the device.

Installation instructions for IP67 devices can be found here:

http://download.peplink.com/manual/IP67_Installation_Guide.pdf

https://www.peplink.com