Wan Connection Settings (Common) - peplink PEPWAVE MAX Series User Manual

Security
Shared Key
Preffered
BSSID
Connected
Method
DNS Servers
9.4

WAN Connection Settings (Common)

The remaining WAN-related settings are common to the WAN connection:
Speed
https://www.peplink.com
This option allows you to select which security policy is used for this wireless
network. Available options:
● Open
● WPA3 -Personal (AES:CCMP)
● WPA2/WPA3 -Personal (AES:CCMP)
● WPA2 – Personal: AES:CCMP
● WPA2 – Enterprise: AES: CCMP
● WPA/ WPA2 – Personal: TKIP/AES:CCMP
● WPA/ WPA2 – ENterprise: TKIP/AES:CCMP
Enter the password for the wireless network.
Configure the BSSID. The BSSID is the MAC address of the wireless access point
(WAP).
Choose DHCP or Static IP.
Configure the DNS servers that this WAN connection should use.
Physical Interface Settings
This is the port speed of the WAN connection. It should be set to the same speed
as the connected device in case of any port negotiation problems.
When a static speed is set, you may choose whether to advertise its speed to the
peer device or not. Advertise Speed is selected by default. You can choose not to
advertise the port speed if the port has difficulty in negotiating with the peer device.
Default: Auto
139 Copyright @ 2021 Peplink