Per-User Bandwidth Control; High Availability Via Vrrp - peplink PEPWAVE MAX Series User Manual

3.3

Per-User Bandwidth Control

With per-user bandwidth control, you can define bandwidth control policies for up to 3 groups of
users to prevent network congestion. Define groups by IP address and subnet, and set
bandwidth limits for every user in the group.
3.4

High Availability via VRRP

When your organization has a corporate requirement demanding the highest availability with no
single point of failure, you can deploy two Peplink routers in
Availability mode, the second device will take over when needed.
Compatible with: MAX 700, MAX HD2 (All variants), HD4 (All Variants)
https://www.peplink.com
High Availability mode
71
. With High
Copyright @ 2021 Peplink