Port Settings - peplink PEPWAVE MAX Series User Manual
For more information, please visit peplink.com
Hide thumbs
Also See for PEPWAVE MAX Series:
- User manual (284 pages) ,
- User manual (436 pages) ,
- User manual (260 pages)
Table of Contents
Advertisement
Address
DHCP Option 82
Once DHCP is set up, configure LAN Physical Settings , Static Route Settings , WINS Server
Settings , and DNS Proxy Settings as noted above.
8.2
Port Settings
To configure port settings, navigate to Network > Port Settings
On this screen, you can enable specific ports, as well as determine the speed of the LAN ports,
whether each port is a trunk or access port, can well as which VLAN each link belongs to, if any.
https://www.peplink.com
active-passive DHCP server configurations, enter active and passive DHCP server
relay IP addresses in DHCP Server 1 and DHCP Server 2.
DHCP Option 82 includes device information as relay agent for the attached client
when forwarding DHCP requests from client to server. This option also embeds
the device's MAC address and network name in circuit and remote IDs. Check this
box to enable DHCP Option 82.
115
Copyright @ 2021 Peplink
Advertisement
Table of Contents
